WD-151E - WD-421E Rev. 00 (202310)
Operating instructions touch
53
4.3.2 Emptying and daily cleaning
A guide to emptying and cleaning is also displayed on the panel when the relevant
function has been selected.
Machines with manual emptying and manual cleaning
• Open the machine doors.
• Unhook all of the curtains.
• Remove the filters and filter tray.
• Locate the emptying bar and empty the tanks by pulling the emptying bar
towards you.
• Remove the level pipe and drain seals.
• Carefully clean all of the parts removed from the machine. N.B.! Never
leave the curtains, level pipes and outlet seals so that the rubber sleeve
rests on a surface. The sleeve can become deformed leading to the risk of
water leakage in the tanks.
• Clean the wash arms, including the nozzles.
• Clean the wash nozzles.
• Clean the doors. Wipe the rubber strips on the doors which are fitted at the
top of the back of the doors.
• Rinse all the inside surfaces of the machine and clean the tanks. Use our
Cleaning Gun (WD240.9009) for best results.
• Turn off the machine using ON/OFF.
• Leave the machine with the doors open.
The filter in the final rinse tank must also be cleaned.
To Next Page
Loading...
