Wexiodisk WD-7 DUPLUS

Questions and Answers

M
marysparksAug 15, 2025
Why is my Wexiodisk Dishwasher not cleaning properly?
- R
  Randall AdamsAug 15, 2025
  There are several reasons why your Wexiodisk Dishwasher might not be cleaning effectively. The rinse and wash nozzles could be clogged with dirt, so check and clean them. Ensure you're using enough detergent, with the hose submerged and the filter clean. If the water in the tank is too dirty, change it. Also, foam in the tank can be a problem, so verify the washing temperature isn't too low and that you're using the correct detergent. Selecting a program with a longer washing time might help. If dirt has dried on the items, soak them before washing. Make sure items are correctly positioned in the baskets, using the right accessories. Finally, consider increasing the rinsing capacity.
S
Shannon GonzalezAug 18, 2025
How to improve drying in my Wexiodisk WD-7 DUPLUS Dishwasher?
- M
  Michael PayneAug 18, 2025
  If items aren't drying in your Wexiodisk Dishwasher, start by checking and cleaning the rinsing nozzles, as they might be blocked. Also, verify that you're using enough rinsing agent, ensuring the hose is submerged and the filter is clean. Finally, remove the washed items once the programme has ended instead of leaving them in the machine.
M
Michael WebbAug 21, 2025
Why is my Wexiodisk WD-7 DUPLUS not filling with water?
- Z
  Zachary FigueroaAug 22, 2025
  If your Wexiodisk Dishwasher isn't filling with water, check if the incoming water stopcock is closed and open it. Also, ensure that the hood is fully closed. Blocked rinsing pipe nozzles can also prevent filling, so clean the rinsing nozzles.
S
stevenpriceAug 26, 2025
What to do if my Wexiodisk WD-7 DUPLUS Dishwasher does not start washing?
- C
  clairezhangAug 26, 2025
  If your Wexiodisk Dishwasher does not start washing, make sure the hood is closed properly. Also, check if any dishes are blocking the magnet on the hood and remove them.
J
julia74Aug 28, 2025
What to do if my Wexiodisk Dishwasher does not stop filling?
- C
  Carly GayAug 28, 2025
  If your Wexiodisk Dishwasher doesn't stop filling, it could be that the level pipe is not in place; fit the level pipe. Also, ensure the level pipe's rubber sleeve is sealing against the bottom plate. Adjust the level pipe and check the rubber sleeve for damage, replacing it if necessary.
D
Donna MooreSep 1, 2025
Why does my Wexiodisk Dishwasher fill slowly?
- B
  bmaciasSep 1, 2025
  If your Wexiodisk Dishwasher fills slowly, the rinsing pipe nozzles might be blocked. Clean the rinsing nozzles to resolve this issue.
K
Katherine JonesSep 4, 2025
Why does my Wexiodisk Dishwasher stop mid-cycle and start taking in water?
- K
  Kenneth RileySep 4, 2025
  If your Wexiodisk Dishwasher stops mid-cycle and starts taking in water, the level pipe's rubber sleeve might not be sealing against the bottom plate. Adjust the level pipe, inspect the rubber sleeve for damage, and replace it if needed.
S
Sharon BeanSep 7, 2025
How to fix noise from the wash pump in my Wexiodisk Dishwasher?
- W
  Whitney RamosSep 7, 2025
  Noise from the wash pump in your Wexiodisk Dishwasher can be due to a low water level or foam in the tank. Check that the level pipe is closed. If the rubber sleeve is damaged, change it.
R
Rebecca DicksonSep 12, 2025
What causes items to tip over in the Wexiodisk WD-7 DUPLUS Dishwasher baskets?
- S
  Sandra CruzSep 12, 2025
  Items tipping over in the Wexiodisk Dishwasher baskets can occur if the items are incorrectly positioned; put the items in the correct position. If you are washing light items, use a net grid to hold the items in place.

Summary

General Instructions

Symbols Used

Explains standard symbols used throughout the manual for safety and information.

Machine Rating and Identification

Details the machine's rating plate information, including model, serial number, and technical data.

Manual Correspondence Check

Advises verifying the machine's type description against the manual cover.

EU Declaration of Conformity

Provides information on the machine's compliance with EU directives and harmonised standards.

Safety Instructions

General Safety Information

Outlines general safety principles and responsibilities for machine operation and maintenance.

Transport Safety

Provides guidance on safe handling and transport of the machine to prevent tipping and damage.

Installation Safety

Covers essential safety aspects for machine installation, including electrical and water connections.

Detergent and Drying Agent Safety

Warns about risks associated with handling detergents and drying agents, recommending protective measures.

Operational Safety Precautions

Details safety measures during operation, including high temperatures, crushing risks, slipping hazards, and noise.

Installation Instructions

General Installation Information

Provides general advice and cross-references for correct machine installation methods.

Installation Site Requirements

Specifies necessary site conditions such as lighting, ventilation, temperature, power, water, and drainage.

Transport and Storage Guidelines

Guides on proper machine transport, ensuring upright position, and storage in frost-free conditions.

Installation Procedures

Outlines steps for preparing the installation site and positioning the machine correctly.

Electrical Connection Details

Explains how to correctly connect the machine's electrical supply, including safety precautions.

Water Connection Procedures

Details the requirements for water connections, including pressure, flow, and specific types of water.

Drain;Waste Pipe Connection

Specifies requirements for waste water disposal, including pipe size and connection methods.

Ventilation Requirements

Mentions ventilation requirements related to the machine's heat load for the room.

Bleeding Hood Lifting Cylinder

Provides step-by-step instructions for bleeding the hydraulic system of the hood lifting cylinder.

Detergent and Drying Agent Setup

Guides on connecting and setting up the optional detergent and drying agent dispensing systems.

Hinged Basket Conveyor Adjustment

Explains how to adjust the hinged basket conveyor for proper alignment and operation.

Condensation Unit Installation

Details the installation process for the optional condensation unit with heat recovery.

Steam Hood with Extractor Installation

Provides instructions for fitting the optional steam hood with an integrated extractor.

Auxiliary Equipment Installation

Covers the installation and connection of additional equipment like sinks and conveyors.

Trial Operation Procedures

Outlines the steps for performing a trial operation and start-up schedule for the machine.

Documentation Requirements

Emphasizes the importance of keeping manuals available for proper use and servicing.

Operating Instructions

Machine Design and Components

Identifies key components and controls of the dishwasher through diagrams and labels.

Preparations Before Filling

Lists essential checks and preparations required before filling the machine with water.

Filling and Heating the Machine

Describes the process of filling the machine with water and heating it to the required temperature.

Positioning Dishware in Baskets

Guides on how to correctly place dishware in the washing baskets for optimal cleaning.

Basket Tilting During Final Rinse

Explains the function and operation of tilting the washing basket during the final rinse.

Setting Wash Modes (WD-7)

Details how to select between normal and heavily soiled wash modes on specific models.

Programme Selection

Describes the available wash programmes (Beer, Standard, Wine glasses) and their basic functions.

Changing Wash Temperature and Time

Explains how to adjust washing temperature and chemical washing times via service mode.

Washing Process Details

Provides information on the washing phase, including start-up, hood functions, and rinse indicators.

Checking Wash Results

Lists common wash result problems and their causes and suggested measures for improvement.

Changing the Water

Outlines procedures for changing the wash water, including steps for machines with and without a drain pump.

Incorrect Cleaning Methods

Warns against using unsuitable cleaning agents and methods that can damage the machine.

Draining and Internal Cleaning (WD-6;WD-7)

Provides step-by-step instructions for draining and cleaning WD-6 and WD-7 models.

Draining and Internal Cleaning (WD-6 DUPLUS;WD-7 DUPLUS)

Provides step-by-step instructions for draining and cleaning WD-6 DUPLUS and WD-7 DUPLUS models.

Daily Cleaning Procedures

Details the daily internal and external cleaning routines for the machine.

Weekly Cleaning Requirements

Specifies tasks for weekly cleaning, often triggered by specific information messages.

Cleaning for Alarms or Annual Service

Covers cleaning procedures related to specific alarms or scheduled annual maintenance.

Operating Problems and Troubleshooting

Lists common operational problems, their causes, and actions to resolve them, including error codes.

Technical Specifications

Capacity and Operating Data

Presents data on washing times, capacity, water consumption, and sound levels for different models.

Machine Connection Data

Lists electrical connection requirements, fuse ratings, and cable specifications.

Water, Drain, and Ventilation Connections

Specifies water quality, connection sizes, pressure, flow rates, and drain capacity.

Transport Size and Weight

Provides dimensions and weight information for transporting the machine.