Glasstilt Rev. 2.0 (202202)
Operating instructions
37
4.2.5 Changing the washing temperature and washing time
The factory setting for the washing temperature is 60°C. The operator can adjust
the temperature to between 55 and 70°C.
Upon delivery, the total programme time and rinsing temperature for the
respective programmes are set as follows:
* The washing times can be adjusted between 1.0 and 6.0 minutes.
** The total washing time is longer because of double rinsing.
Changing the values. Selecting service mode
The machine must be set to “service mode” when the operator needs to change
a value. This is done using the control panel. The values that can be changed
flash. The displays and buttons have different functions than when the machine
is in normal operating mode.
The panel's functions in service mode
WD-6 and WD-7
Programme Chemical
washing time *
Rinsing
temperature
Total
programme time
Beer glasses (P1) 1.0 min. 65°C 1.2 min.
Standard glasses (P2) 1.0 min. 85°C 1.2 min.
Wine glasses (P3) 2.0 min. 65°C 2.2 min.
WD-6 DUPLUS and WD-7 DUPLUS
Programme Chemical
washing time *
Rinsing
temperature
Total
programme time **
Beer glasses (P1) 1.0 min. 65°C 1.4 min.
Standard glasses (P2) 1.0 min. 85°C 1.4 min.
Wine glasses (P3) 2.0 min. 65°C 2.4 min.
309538
-
-
-
--
--
-
-
-
--
--
1
7
6
5
4
3
2
9
8
-
-
-
--
--
-
-
-
--
--
To Next Page
Loading...
