WD-151E - WD-421E Rev. 00 (202310)
Operating instructions touch
55
Cleaning the filter
The final rinse tank (12) must be empty when cleaning the filter. The tank must be
emptied in connection with daily cleaning.
• Unscrew the cover (C) and remove the filter (B). Rinse the filter and cover.
• When refitting, it is important to fit the filter correctly to ensure that it is not
damaged and that no leakage occurs.
• First fit the filter (B) in the filter housing (A) then ensure that it is sitting
straight.
• Fit the cover (C), (does not need to be screwed tight).
Removing/fitting the filter
A = Filter housing
B = Filter
C = Cover
Externally
Wipe the outside of the machine with a soft, damp cloth.
To Next Page
Loading...
