Need help?Do you have a question about the WFCO WF-68100-AD Series and is the answer not in the manual?
General| Brand | WFCO |
|---|---|
| Model | WF-68100-AD Series |
| Category | Media Converter |
| Language | English |
Protects converter circuitry from battery connected backwards using reverse polarity fuses.
Fan speed controlled by current draw, providing better component cooling.
Unit shuts down if internal temperature exceeds critical point, restarts when cooled.
Output current remains constant, voltage drops if maximum rating is exceeded.
Output voltage drops to zero volts during a short circuit, resumes when condition is removed.
Details the 35 Amp reverse polarity fuses on the rear panel, type ATC or ATO.
Feature evaluates battery type and selects appropriate charging program for optimal performance.
Maximizes battery life for Lead Acid/AGM using Absorption, Bulk, and Float modes.
Provides 13.6 VDC to power circuits, current-limited; voltage drops if load exceeds max current.
Targets 14.4 VDC for battery charging; voltage recovers as load/current decreases.
Provides a trickle charge (13.2V) to preserve battery life and keep it ready.
Charger uses Bulk and Absorption modes for lithium batteries.
Procedure to check output voltage using a voltmeter after disconnecting battery cables.
States the product is UL-Listed and cUL-Listed (Canadian).
Details FCC compliance for digital devices and potential interference.
Guidance on selecting a mounting location, ensuring clearance and ventilation.
Instructions for connecting 2 AWG wires to the POS+ and NEG- lugs on the fuse board.
Lists specific conditions under which the OEM warranty does not apply.
Outlines the steps for submitting a warranty claim, including RGA number process.
To Next Page
