Wfly WFT07 - Product Illustration; Rudder
Trim; Battery Cover

ON
ONONON
Power LED
K1
K2
V1
Elevator/
Rudder rocker
Ruddertrim
Menu key
Exit
Add
Reduce
Elevator trim
RF LED
K4
K3
Buzzer
Throttle Trim
Aileron/
Throttle stick
Aileron Trim
Enter key
Arrow keys
Trainer/DSC
Battery cover
Product illustration (Right hand throttle)
K1:Two stalls. Throttle lock, throttle flameout
K2:Three stalls. Timer, fixed-wing 5ch, fixed-wing landing flaps mixing.
K3:Two stalls Dual Rate (NORMAL,IDLE)
K4:Coaching,the seventh channel
2
3
4
5
6
7
8
11
9
10
1
11
MENU:After booting, press the menu button to enter the function
menu - Preferences. In addition,when staying in the function
interface,press this key will be back to the menu.
EXIT:Press this key, you can return to the previous menu level, or
exit the edit state.
+/-:Can be used to adjust numerical value. Setting numerical
value, keeping pressing + / -, accelerate the function setting.
Arrow Keys:Arrow keys are divided into upper and lower, left
and right keys, can be used to switch the set up or edit the item.
Confirm key:this confirm key have
three kinds of function )
> With the menu to access the item.
> To enter the edit mode.
> Press this button long time, the
selected item restore the default value.
1. LOGO.
2. 2.4GHz work instructions:Display 2.4GHz at work,no
display when closed.
3. Airplane mode: Helicopter Helicopter mode display
signs, fixed-wing mode displays a fixed-wing flag.
4. Accumulated time: displays the cumulative duration
of use, can also be reset.
5. Battery voltage display.
6. Model data display: 1, 2, 3, etc ...
7. Mixing status display: mixing state (throttle lock, throttle cut, stunt mode) display MIX.
8. Swash helicopter display: the non-normal mode swashplate displayed CCPM.
9. Coach function display: coach mode display "T" and flashes.
10. The timer display.
11. Digital electronic tuning: graphics + numerical value dual display, and with tone reminder.
6