COMBINATION ELECTRIC FIREPLACE/HEATER
Whalen Furniture Mfg. Inc. Page 4 Factory No. XX-XXXXX
• The Fireplace/Heater Remote Control
A great feature of the Whalen Fireplace/Heater unit is the small remote control. This remote combines all the
functions of the front panel controls of the fireplace/heater with the convenience of not having to leave the
comfort of your seat to change the settings of the fireplace/heater.
The first thing to do with the remote control is to install the battery. The battery is supplied with the remote
control. Replacement batteries can be purchased at any electronics store. The part number for the battery is
CR2032.
1. Turn the remote control over, and locate the battery cover. (Figure 4)
Figure 4
2. Remove the battery cover by sliding it towards the bottom end of the remote control.(Figure 5)
Figure 5
3. The battery has two sides, one with a button feature, and the other is flat. (Figure 6)
Figure 6
4. Insert the battery with the button side into the remote control, and make sure the battery is
firmly seated into the remote control. (Figure 7)
Figure 7
To Next Page
Loading...
