Section 1 - 320 Outrage
320 Outrage-Owner’s Manual
“THE MISSION OF BOSTON WHALER IS TO PROVIDE CONSUMERS WITH THE
SAFEST, HIGHEST QUALITY, MOST DURABLE BOATS IN THE WORLD”.
We are dedicated to creating a superior product providing you with comfort, performance, safety and dependability. All
of our boats comply with the safety standards set by the United States Coast Guard and are designed, engineered and
manufactured in accordance with applicable recommendations and guidelines of the American Boat and Yacht Council
(A.B.Y.C.) and certified by the National Marine Manufacturers Association (N.M.M.A.).
Construction Standards
4
Hull Identifcation Number
The “Hull Identification Number” is located on the
starboard side of the transom wall.
This is the most important identifying factor and must
be included in all correspondence related to your ves-
sel. Failure to do so will only create delays. Also of
vital importance are the engine serial numbers and
part numbers when writing about or ordering parts
for your engine.
Our Hull
Boston Whaler® hulls are constructed with our pat-
ented Unibond™ construction. This involves shoot-
ing high density foam into a closed mold system.
The foam expands to fill voids in the hull, and when
the finished product is pulled from the mold, the deck
and the hull are chemically bonded to form a solid,
inseparable unit.
2
3
4
Hull
Identification
Number Location
When your 320 Outrage needs to be serviced or regu-
lar maintenance is needed, it should be taken to an
authorized Boston Whaler® dealer.
To find a Boston Whaler® dealer in your area call:
1-800-942-5379
Domestic/International
If a problem is not handled to your satisfaction:
Discuss any warranty related problems directly
with the service manager of the dealership or your
sales person. Give the dealership an opportunity
to help the service department resolve the matter
for you.
Servicing your Boston Whaler
Typical H.I.N. Description
1
1 No air voids
2 High density closed cell non-absorbent foam
3 High quality resins and gelcoats
4 Woven glass matting
High performance boats require intimate knowledge
of their handling characteristics for safe high speed
operation.
• Learn the effects of trim, steering and
throttle changes at gradually increasing
levels of speed.
• Approach full throttle while adjusting trim for
safe handling of the vessel.
WARNING
!
To Next Page
Loading...
