WhalesBot Eagle - Page 28

27
Clear
digital
tube
Digital
tube
Clear the content
on the digital tube.
Set LED
lights
RGB LED
Configure RGB
values to specify
the LED light
colors at specific
ports.
Electroma
gnet
Electro-
magnet
Configure the
engagement and
release of
electromagnets at
specific ports.
3. Sensor-related blocks
Block
Snapshot
Description
Flight altitude
Detect the flight
altitude.
Laser
measurement
Use laser to measure
the distance inside
the drone.
Battery voltage
Check the current
battery voltage.
Motherboard
temperature
Detect the current
temperature of the