EasyManua.ls Logo

WHILL Ci - 1. Safety Precautions

WHILL Ci
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
BasicsAssembly iPhone App Freewheel Mode Charging Disassembly Trouble shooting
3
Lift the basket up to remove the velcro fastener at the bottom that secures it to the front drive base.
Pivot the basket forward while still holding it up, and release it from the rear drive base.
Removing the Storage Basket
1
Remove the battery by grasping its handle and pulling it
towards you.
Check that the battery is not locked.
Removing the Battery
4
Removing the Front Drive Base
Pull the base release lever
towards you.
Grab handle A and separate
the front drive base from the
rear drive base.
Front drive base assembly:
handle at the tip of the
footplate and handle A
Rear drive base assembly: a
handle above the battery
compartment and
The anti-tip bar
Handles for transportation
*support the rear drive base with your hand when detaching to make
sure it does not topple over.
Base Release Lever
Handle A
2
Removing the Seat
Remove the storage basket
hooks from the accessory
post.
Pull the seat release lever
towards you.
Hold the armrests and lift the
seat assembly straight up and
off the rear drive base. Lay
the seat assembly down.
Accessory Post
Seat Release Lever
6.
Disassembling for storage or transport

Other manuals for WHILL Ci

Related product manuals