EasyManua.ls Logo

Whirlpool AMD 092/2 - INSTALLATION REQUIREMENTS; LOCATION REQUIREMENTS FOR INSTALLATION; ELECTRICAL SPECIFICATIONS AND SAFETY

Whirlpool AMD 092/2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Location Requirements
NOTES:
The flexible exhaust hose allows placement of
the air conditioner between 23½" and 64" (60
cm and 163 cm) from window or door.
Local air conditioners are designed as
supplemental cooling to local areas within a
room.
To ensure proper ventilation, keep the required
distance from the return air outlet to the wall or
other obstacles at least 23½" (60 cm).
Do not block air outlet.
Provide easy access to grounded outlet.
Electrical Requirements
The local air conditioner should be connected to
a 220-240V / 50Hz, 20-amp fused grounded
outlet.
The use of a time-delay fuse or time-delay
circuit breaker is recommended.
All wiring must comply with local and national
electrical regulations and be installed by a
qualified electrician. If you have any questions,
contact a qualified electrician.
Use your power supply cord:
Plug power supply cord into a grounded outlet.
NOTES:
A damaged power supply cord must be replaced
with a new power supply cord obtained from
the product manufacturer and must not be
repaired.
INSTALLATION REQUIREMENTS

Related product manuals