To Next PageTo Next PageWhat to do if my Whirlpool AMD 082 runs, but does not cool?
If your Whirlpool Air Conditioner runs but doesn't cool, check these: * Clean the filter if it's dirty or obstructed by debris. * Clear any blockage from the air outlet. * In cooling mode, lower the set temperature if it is too high.
What to do if my Whirlpool Air Conditioner does not operate?
If your Whirlpool Air Conditioner isn't operating, here's what you can check: * Ensure the power supply cord is plugged into a grounded outlet. * Check if a household fuse has blown or a circuit breaker has tripped and replace the fuse or reset the circuit breaker if needed. * Make sure you've pressed the On/Off button. * If there was a local power failure, wait for the power to be restored. * Verify that a time-delay fuse or circuit breaker of the correct capacity is being used, and replace it if necessary.
Why does my Whirlpool Air Conditioner seem to run too much?
If your Whirlpool Air Conditioner seems to run too much, consider the following: * Ensure all doors and windows are closed. * If in cooling mode, and the room is heavily occupied or contains heat-producing appliances, use exhaust vent fans while cooking or bathing and try to avoid using heat-producing appliances during the hottest part of the day. * Depending on the size of the room, a higher capacity air conditioner may be required.
What to do if Whirlpool Air Conditioner runs for a short time only, but room is not cool?
If your Whirlpool Air Conditioner runs briefly but doesn't cool the room, lower the set temperature, because it may be too close to the room temperature.
Why does my Whirlpool Air Conditioner keep blowing fuses or tripping circuit breakers?
Your Whirlpool Air Conditioner might be blowing fuses or tripping circuit breakers due to: * Too many appliances being used on the same circuit. Try unplugging or relocating some appliances. * Restarting the air conditioner too soon after turning it off. Wait at least 3 minutes before restarting. * Changing modes too soon after turning it off. Wait at least 3 minutes before restarting the appliance.
How to stop my Whirlpool AMD 082 from cycling on and off too much?
To address a Whirlpool Air Conditioner that cycles on and off too frequently: * Verify that the air conditioner is properly sized for the room. Portable air conditioners are designed for supplemental cooling/heating in local areas. * Clean the filter if it is dirty or obstructed. * If in cooling mode, and there's excessive heat or moisture in the room, use a fan to exhaust it. * Ensure the louvers are free from obstructions like curtains or furniture. * Do not operate the air conditioner in cooling mode if the outside temperature is below 18°C.
General| Brand | Whirlpool |
|---|---|
| Model | AMD 082 |
| Category | Air Conditioner |
| Language | English |
Essential safety rules for installation, operation, and maintenance of the appliance.
Advice on operating the air conditioner safely, including health and environmental aspects.
Guidance on responsible scrapping and recycling of the appliance and its packaging.
Identifies and explains the functions of the control panel buttons and indicators.
Step-by-step instructions for starting the air conditioner using the control panel.
Key information regarding display features, compressor delay, and power failure recovery.
Details on Cooling, Dry, and Fan Only modes, including fan speed and temperature settings.
How to choose fan speeds (Auto, High, Mid, Low) for optimal cooling and comfort.
Explanation of the filter reset light and procedure for cleaning and resetting the air filter.
Instructions for setting and adjusting the desired temperature in Celsius or Fahrenheit.
Procedure to set the current time on the air conditioner's control panel or remote.
How to program the appliance to turn on or off automatically at a set time.
Steps to cancel a previously set timer function for the air conditioner.
Using the Rapid Cool function for quick cooling with automatic fan and temperature settings.
Step-by-step guide for correctly inserting AAA batteries into the remote control.
Instructions for safely removing batteries from the remote control, with a warning for children.
Guidance on proper disposal of used batteries as municipal waste.
Notes on remote control appearance, battery life, and operating range.
How to turn the air conditioner on or off using the POWER button on the remote.
Instructions for choosing modes like Cooling, Dry, and Fan Only via the remote control.
Details on the automatic mode that adjusts cooling/dry settings based on room temperature.
How to manually select fan speeds (Auto, High, Mid, Low) for optimal airflow.
Explanation of the rapid cooling feature and how to exit this mode.
How to raise or lower the temperature setting in Celsius or Fahrenheit.
How to activate sleep mode for quiet operation with automatic fan speed and temperature adjustments.
Instructions for adjusting the vertical airflow direction using the SWING function.
Description of typical sounds produced by the air conditioner during normal operation.
Procedure for draining accumulated water from the unit, especially when the 'Water Full' indicator is on.
Step-by-step guide for removing, cleaning, and reinstalling the air filter for optimal performance.
Instructions for cleaning the exterior surfaces of the air conditioner.
Guidance on preparing and storing the air conditioner when not in use.
Common reasons and solutions for the air conditioner failing to turn on or operate.
Troubleshooting steps for when the air conditioner blows fuses or trips circuit breakers.
Diagnosing and fixing issues like excessive running, short cycles, or lack of cooling.
Guidelines for choosing the optimal placement for the air conditioner and exhaust hose.
Specifications for power supply, grounding, and circuit protection for the appliance.
Instructions on using the power cord correctly and when replacement is needed.
Steps for unpacking the air conditioner and preparing its surfaces for use.
Detailed guide on connecting the exhaust hose and window adapter for proper ventilation.
Illustrations and guidance for installing the window kit in different window types.
Steps to take before calling for service, including troubleshooting and restarting.
Details to provide when contacting customer support for repairs or assistance.
