6. Place the window slider kit into the window,
extending it to fit the width of the window. Be
sure the rain cover is on the outside of the
window.
NOTE: For casement window installation, the
window slider kit may be installed vertically with
the window slider kit opening at the bottom.
7. Insert ¹⁄₂" screw (provided) into the hole in the
inner slider section that is closest to the end of the
outer slider section of the window slider kit.
8. Close the window onto the window slider kit to
secure.
A. ¹⁄₂" screw (provided)
B. Inner slider section
C. Outer slider section
A. To portable air conditioner
B. Outdoors
C. Rain cover
D.Window slider kit
E.Window exhaust adapter
F. Flexible exhaust hose
32
To Next Page
Loading...
