To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool B10P and is the answer not in the manual?
General| Model | B10P |
|---|---|
| Category | Water Dispenser |
| Type | Bottom Loading |
| Leak Proof Design | Yes |
| Dispensing Options | Hot and Cold Water |
| Hot Water Temperature | 90°C |
| Cold Water Temperature | 10°C |
| Power Consumption | 500W |
| Material | Plastic |
| Child Safety Lock | Yes |
| Indicator Lights | Yes |
Basic precautions to reduce risk of fire, electric shock, or injury.
Required tools and parts to gather before starting installation.
Specifies the required water bottle size for installation.
Instructions and warnings for unpacking the water cooler unit.
Guidelines for choosing an appropriate indoor location for the cooler.
Details on the necessary power supply and outlet for the water cooler.
Steps to prepare the water cooler before initial operation.
How to turn on and operate the water cooler, including hot water switch.
Instructions for setting the digital clock on the control panel.
Explanation and settings for the energy saving mode.
Information about the night light feature on specific models.
How to lock and unlock the control panel for cleaning or preventing adjustments.
Overview of the hot and cold water dispensing mechanisms.
How to switch the temperature display between Fahrenheit and Celsius.
Instructions for adjusting the hot and cold water temperatures.
Details on adjusting temperature mixing for specific models.
Step-by-step guide and safety warnings for replacing water bottles.
Recommended methods for cleaning the outside surfaces of the water cooler.
Procedures for cleaning the internal components and reservoir.
Steps for sanitizing the water cooler's internal parts.
Instructions for thoroughly rinsing after cleaning or sanitizing.
Guidance on cleaning the storage compartment of specific models.
How to properly store the water cooler for extended periods.
Solutions for issues where the cooler fails to heat or chill water.
Troubleshooting steps if the cold water is not sufficiently chilled.
Diagnosing and resolving issues with no water dispensing.
Explains normal operating sounds and potential noise issues.
Steps to take if the hot water is not reaching the desired temperature.
Addresses issues related to air bubbles preventing hot water flow.
Common causes and solutions for water leaks from the cooler.
Guidance on obtaining factory-specified replacement parts.
Details of the two-year limited warranty coverage.
Terms, conditions, and exclusions of the warranty.
