9
TROUBLESHOOTING
Anomalies Possible causes / Solution
The washing machine does
not start.
The wash cycle does not start.
The washing machine does
appears on the display).
The washing machine
continuously loads and
unloads water.
t
t
The washing machine does
not drain or spin.
The washing machine
vibrates a lot during the spin
cycle.
The washing machine leaks.
The “Options” and START/
PAUSE
indicator lights
visualises an error code (e.g.:
F-01, F-...).
t
There is too much foam.
DEMO MODE: to deactivate this function, switch the washing machine OFF. Than press and hold “Start/Pause” button, within 5 seconds press also
“ON/OFF”
button and hold both buttons for 2 seconds.
Regulatory documentation, standard documentation, ordering spare parts and other product informa-
tion can be found:
www.whirlpool.com.hk
contact our After-sales Service
To Next Page
Loading...
