4-6
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
REMOVING THE COOKTOP
1. Turn off the gas to the range and discon-
nect the power cord from the wall outlet.
2. Remove the grates and burner caps from
the cooktop.
CAUTION: When you work on the gas range,
be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
WARNING
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
3. Remove the burner heads from the cooktop
(see page 4-2).
4. Unclip the cooktop (see page 4-2) and
raise it up. Move the cooktop to the right
and unhook the left cooktop pin from the
hole in the mounting bracket, then remove
the right pin from the bracket hole, and
remove the cooktop from the unit.
Left Pin In
Bracket Hole
Bracket
Cooktop
To Next Page
Loading...
