COMPONENT ACCESS
Multi-Door Freestanding Refrigerator
n
4-9
Accessing Refrigerator Compartment Components (Continued)
6. Disconnect the wiring before removing the pantry door from
the rails. Remove the wiring cover from the inside of the
door. Push out the release tabs and pull the harness
connecon to remove.
1. Complete
instrucons steps 1-10 and
instrucons steps 1-6.
2. Remove the foam piece on the front which pops up.
3. Li the crisper base out.
4. At the front-le side, remove the harness cover using a at
blade screwdriver.
How top Remove Center crisper to
access the refrigerator evaporator
Horizontal Alignment
Vertical Alignment
Pantry Door fronts
To Next Page
Loading...
