To Next PageTo Next PageHow to solve an electrical module fault on a Whirlpool Washer?
For Whirlpool Washer models with a fault display, switch off the appliance, select a program, and press the 'Start/Pause' button again to continue. For models without a fault display, switch the appliance off and then on again.
Verify machine is undamaged and all parts are present after unpacking.
Essential step to prevent interior damage during transport before initial use.
Proper placement and levelling on a solid floor for optimal performance.
Connect cold water supply hose according to local regulations and specifications.
Connect drain hose to siphon or sink edge, avoiding siphoning effects.
Ensure qualified installation to an earthed socket, following safety regulations.
Information on recyclable packaging and proper disposal of the washing machine.
Guidelines for safe operation, cleaning, and child safety measures.
Compliance statement with relevant European Directives for safety and EMC.
Identifies key parts like worktop, control panel, dispenser, door, and filter.
Instructions on how to properly open and close the washing machine door.
How to use the plastic screw to lock or unlock the appliance door.
Steps to run a short wash cycle without laundry to remove residual water.
Guidance on sorting clothes by fabric type, colour, size, and handling delicates.
Advice on emptying pockets and securing closures like zips before washing.
Recommendations for treating stains and using dyes suitable for washing machines.
Instructions on how to load laundry loosely into the drum for optimal washing.
Factors influencing detergent choice and remarks on specific compounds and usage.
Guidance on dosage based on soiling, load size, and water hardness, with a chart.
Explanation of dispenser chambers for various detergents and additives.
Instructions for using liquid detergents, fabric softener, bleach, and starch powder.
Step-by-step guide to safely remove, clean, and reinsert the machine's filter.
Instructions for draining residual water before further operations or maintenance.
How to clean appliance exterior, control panel, and door seal.
Recommendation to regularly check and clean the filter for optimal performance.
Detailed steps for removing, washing, and refitting the detergent dispenser drawer and parts.
Instructions for cleaning mesh filters at the water inlet connection points.
Resolving issues when the appliance does not start or lamps do not light up.
Troubleshooting for appliance stopping during a programme or specific lamps flashing.
Identifying and resolving issues with detergent and additive residues in the dispenser.
Solutions for appliance vibration and poor final spin results, including imbalance.
Diagnosing and resolving problems related to no or insufficient water supply.
How to interpret automatic safety system detections and fault codes.
Detailed steps for resolving water inlet faults, checking tap, hose, and filters.
Troubleshooting steps for draining faults, checking drain hose and pump/filter blockage.
Procedure for electrical module faults and when to contact After-Sales Service.
Causes and resolution for Water Stop faults, including foam or leaks, and pump activation.
Steps before contacting After-Sales Service and required information for support.
Instructions for safely moving the washing machine, including water removal and fitting transit bolts.
Procedure for safely replacing the fuse in the appliance's plug.
Ensuring plug/socket compatibility and seeking professional help for changes.
General