What to do if single-dose laundry packet is not dissolving in Whirlpool WGT4027HW?
Ensure the laundry packet is added to the washer basket before adding clothes. Do not add the packet to the dispenser. Follow the manufacturer’s instructions to avoid damage to your garments.
Why is my Whirlpool Washer/Dryer not running or filling?
If your Whirlpool Washer/Dryer won’t run, fill, or stops working, or the wash light remains on, ensure it's properly connected to a grounded outlet and receiving power, avoiding extension cords. The lid must be closed for the washer to operate. The washer will pause during certain cycles. If the washer is tightly packed, remove some items to redistribute the load evenly. Do not add more than one or two additional items after cycle has started or add more water to the washer. Reset a tripped circuit breaker or replace any blown fuses. If problems persist, consult an electrician.
How to improve cleaning and stain removal in my Whirlpool WGT4027HW Washer/Dryer?
To ensure your Whirlpool Washer/Dryer cleans effectively and removes stains, do not add extra water to the washer, as it senses the load size and adds the correct amount. Load garments loosely and add detergent to the bottom of the basket before adding clothes. Only add one or two garments after the washer has started. Adding detergent on top of the load is not recommended.
How to prevent load from tangling in my Whirlpool WGT4027HW Washer/Dryer?
To avoid tangling in your Whirlpool Washer/Dryer, load garments loosely and evenly around the basket wall. Select a cycle with a slower wash action and spin speed, though items will be wetter. Mix types of load items and use the recommended cycle for the garments being washed.
Why are there dry spots on my load after a Whirlpool WGT4027HW cycle?
If you find dry spots on your load after a cycle in your Whirlpool Washer/Dryer, try washing a smaller load or using the Heavy Duty cycle. The high spin speeds combined with airflow during the final spin can cause items near the top of the load to develop dry spots, which is normal. If the washer is tightly packed, use the Bulky Items cycle for a higher water fill. Only add one or two additional garments after the washer has started.
Why are there residues remaining on my Whirlpool Washer/Dryer load after washing?
If you notice residues remaining on your load after washing in your Whirlpool Washer/Dryer, it may be due to sand, pet hair, lint, detergent, bleach, or other residues requiring additional rinsing. Select the Heavy Duty cycle to resolve this.
General| Brand | Whirlpool |
|---|---|
| Model | WGT4027HW |
| Appliance Category | Washer/Dryer |
| Color | White |
| Energy Star Certified | No |
| Voltage | 120V |
| Width | 27 in. |
| Control Type | Electronic |
| Agitator Type | Agitator |
| Type | Washer/Dryer Combo |
| Height | 44 in |
| Appliance Type | Top Load Washer/Dryer Combo |
To Next Page
