Whirlpool WHED20 - User Manual

Other manuals for Whirlpool WHED20

Datasheet2 pages

Questions and Answers

D
dunnlaurenAug 12, 2025
What to do if water leaks at push connect fittings in my Whirlpool Water Filtration Systems?
- J
  Jillian MyersAug 12, 2025
  If you notice water leaking at the push connect fittings of your Whirlpool Water Filtration System, here are a few things to check: 1. Ensure the tubing is pushed in all the way into the fittings. 2. Make sure the tubing is cut square. 3. Inspect the tubing for any nicks; if present, remove the nicked portion and reinsert the tubing. 4. Check the outer tubing surface for smoothness; remove any rough portions before reinserting the tubing.
T
Tricia ValenzuelaAug 16, 2025
What to do if Whirlpool Water Filtration Systems leaks at push connect fittings?
- A
  Alexis GilbertAug 16, 2025
  If you notice water leaks at the push connect fittings of your Whirlpool Water Filtration System, it might be because the tubing is not fully inserted. Ensure the tubing is pushed all the way into the fittings. Also, check if the tubing was not cut square or if it is nicked. If so, cut the tubing square or remove the nicked portion and reinsert the tubing into the fitting. Finally, the outer tubing surface might not be smooth. Remove the rough portion and reinsert the tubing into the fitting.
T
Tiffany SmithAug 20, 2025
Why does my Whirlpool Water System have a bad taste or odor?
- B
  Bryan LoveAug 20, 2025
  If your Whirlpool Water System has a strange taste or odor, it could be due to expended pre- and post-filters. Replacing the filter cartridges should resolve this. Alternatively, the system might be contaminated, and you may need to sanitize it. Call 1-866-986-3223 for instructions.
C
Charles ThompsonAug 25, 2025
What to do if my Whirlpool Water System leaks at the push connect fittings?
- J
  Johnathan ThomasAug 25, 2025
  If you notice water leaks at the push connect fittings of your Whirlpool Water System, ensure the tubing is pushed all the way into the fittings. Also, make sure the tubing is cut square. If the tubing is nicked or the outer surface is not smooth, remove the affected portion and reinsert the tubing into the fitting.
L
Lori PorterAug 27, 2025
How to fix the faucet LED indicator light on my Whirlpool Water System after battery change?
- M
  Mary WilliamsAug 27, 2025
  If the faucet LED indicator light on your Whirlpool Water System doesn't function after a battery change, the battery might be dead. Replace it with a new one. If that doesn't work, the battery may be installed incorrectly; ensure it is installed correctly.
T
Tiffany JohnsonAug 31, 2025
Why does my Whirlpool Water Filtration System have a bad taste or odor?
- A
  Audrey WallerAug 31, 2025
  A bad taste or odor in your Whirlpool Water Filtration System can be due to a couple of reasons. It might be that the pre and post filters are expended, in which case you should replace the filter cartridges. Alternatively, the system may be contaminated, and you would need to sanitize it.
J
Jonathan CaseySep 4, 2025
How to fix the faucet LED indicator light on my Whirlpool Water Filtration Systems after a battery change?
- T
  tylerjenkinsSep 4, 2025
  If the faucet LED indicator light on your Whirlpool Water Filtration System isn't working after you've changed the battery, there are a couple of things to consider. First, the new battery might be dead, so try replacing it with another new one. Second, you may have installed the battery incorrectly, so double-check that it's installed correctly.
C
Cindy MarquezSep 7, 2025
How to fix Whirlpool Water Filtration Systems faucet LED if it doesn't function after battery change?
- A
  Aaron HarrisSep 7, 2025
  If the faucet LED indicator light on your Whirlpool Water Filtration System doesn't work after a battery change, the new battery might be dead. Try replacing it with another new battery. Also, make sure the battery is installed correctly.

Summary

Installation Steps

Cold Water Supply Fitting

Instructions for connecting the water supply to the filter system, ensuring a leak-tight connection.

Make Hole For Filtered Water Faucet

Guidance on selecting and drilling a mounting hole for the filtered water faucet.

Install Faucet

Steps for mounting and securing the filtered water faucet to the prepared surface.

Make Tubing Connections

Detailed instructions for connecting the system's tubing using push-in fittings.

Filter Cartridges

Filter Cartridge Life

Information on factors affecting filter life and system capacity.

Filter Cartridge Replacement

Step-by-step guide for removing old cartridges and installing new ones.

Faucet Electronics

Faucet Timer and Battery Change

Details on the faucet's timer function, LED indicator, and battery replacement procedure.