EasyManua.ls Logo

Whirlpool WHADUS5 - User Manual

Whirlpool WHADUS5
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
201-8402712 (Rev. 02 7/11/16)
Manufactured and warranted by
Ecodyne Water Systems
1890 Woodlane Drive
Woodbury, MN 55125
How to install, operate
and maintain your
Dual Stage
Water Filtration System
Model WHADUS5
Installation and Operation Manual
System tested and certified by NSF International
against NSF/ANSI Standard 42 for the reduction
of chlorine taste and odor, and Standard 53 for
the reduction of cysts, lead, MTBE and VOCs.
Do not return unit to store
If you have any questions or concerns when
installing, operating or maintaining your water
filtration system, call our toll free number:
1-866-986-3223
Monday- Friday, 7 AM - 6 PM CST or visit
whirlpoolwatersolutions.com
When you call, please be prepared to provide
the model number and date code of your
product, found on the rating decal on back.

Table of Contents

Questions and Answers

  • G
    gabrieltaylorJul 27, 2025
    What to do if Whirlpool WHADUS5 leaks at push connect fittings?
    • Y
      yolanda15Jul 28, 2025
      If your Whirlpool Water Filtration System is leaking at the push connect fittings, there are several possible causes: * The tubing may not be pushed in all the way into the fittings; ensure it is fully inserted. * The tubing may not be cut square; make sure it has a square cut. * The tubing may be nicked; remove the nicked portion and reinsert the tubing. * The outer tubing surface may not be smooth; remove the rough portion and reinsert the tubing.
  • L
    lopezbryanAug 5, 2025
    How to fix Whirlpool Water Filtration Systems if LED indicator light doesn't function after battery change?
    • M
      Mary TaylorAug 5, 2025
      If the LED indicator light on your Whirlpool Water Filtration System faucet doesn't work after a battery change, the battery may be dead, so replace it with a new one. Alternatively, the battery may be installed incorrectly; ensure it is installed correctly.
  • D
    Daniel LoveAug 15, 2025
    Why does my Whirlpool Water Filtration System water taste bad?
    • J
      Jasmine Mejia MDAug 15, 2025
      Taste and odor issues in your Whirlpool Water Filtration System can occur if the pre and post filters are expended, requiring you to replace the filter cartridges. Another reason could be system contamination, which requires sanitization. Call 1-866-986-3223 for instructions.

Summary

Specifications and Performance Claims

Specifications

Details on water pressure, temperature, flow rate, and filter lifespan.

Before You Start

Dimensions

Parts of the System

Materials and Tools Needed

Typical Undersink Installation

Installation Instructions

Step A - Install Cold Water Supply Fitting

Instructions for connecting the water supply fitting to the cold water line.

Step B - Make Hole For Filtered Water Faucet

Guidance on drilling a hole for the filtered water faucet installation.

Step C - Install Faucet

Procedures for mounting and connecting the filtered water faucet.

Step D - Make Tubing Connections

How to connect the tubing between the supply fitting, filter, and faucet.

Step E - Turn On Water, Check for Leaks and Rinse Carbon Fines

Steps for turning on water, checking for leaks, and flushing the system.

Filter Cartridges

Filter Cartridge Life

Information on how long filter cartridges last and factors affecting their lifespan.

Filter Cartridge Replacement

Step-by-step guide for replacing the filter cartridges.

Faucet Electronics

Faucet Timer

Explanation of the faucet's battery-operated timer and LED indicator.

Battery Change

Instructions for replacing the battery in the faucet electronics.

Troubleshooting the System

Parts List

Whirlpool WHADUS5 Specifications

General IconGeneral
BrandWhirlpool
ModelWHADUS5
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals