White Rodgers 1F80-0471 User Manual

Index Page
Installation 2
Wiring Connections 2
Thermostat Quick Reference 3
Installer Confi guration Menu 4
Operating Your Thermostat 6
Programming 6
Troubleshooting 8
Save these instructions for future use!
Description
Gas or Oil Heat Yes
Electric Furnace Yes
Heat Pump (No Aux. or Emergency Heat) Yes
Heat Pump (with Aux. or Emergency Heat) No
Systems with up to 3 Stages Heat, 2 Stages Cool No
Heat Only Systems Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces Yes
Cool Only Systems Yes
Hydronic (Hot Water) Zone Heat – 2 Wires Yes
Hydronic (Hot Water) Zone Heat – 3 Wires Yes
Blue Single 1/1 Stage Thermostat with
Automatic Heat/Cool Changeover Option
PART NO. 37-6749D
Replaces 37-6749C
0902
Single Stage or Heat Pump
Installation and Operating Instructions for Model:
APPLICATIONS
THERMOSTAT APPLICATION GUIDE
1F80-0471 Thermostat
SPECIFICATIONS
Electrical Rating:
Battery Power. . . . . . . . . . . . . . . . . . . . . . . . . . mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 VAC
Terminal Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 A per terminal, 1.5A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45° to 90°F (7° to 32°C)
Differential (Single Stage) . . . . . . . . . . . . . . . . . . . . Heat 0.6°F; Cool 1.2°F (adjustable)
Differential (Heat Pump) . . . . . . . . . . . . . . . . . . . . . Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient. . . . . . . . . . . . . . . . . . . . . . . . . . 32° to +105°F (0° to +41°C)
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . . 90% non-condensing max.
Shipping Temperature Range . . . . . . . . . . . . . . . . . -4° to +150°F (-20° to +65°C)
Dimensions Thermostat. . . . . . . . . . . . . . . . . . . . . . 3.4"H x 4.4"W x 1.3"D
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this prod-
uct may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For proper
disposal of a product containing mercury or a sealed
container of spilled mercury, place it in a suitable shipping
container. Refer to www.white-rodgers.com for location to
send product containing mercury.
Model Programming Choices
1F80-0471 5/2 Day 5/1/1 Day Non-Programmable
1F86-0471 Non-Programmable
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
www.white-rodgers.com

White Rodgers 1F80-0471 Specifications

General

Display	Digital
Backlight	Yes
Stages of Heating/Cooling	1 Stage Heating, 1 Stage Cooling
Voltage	24VAC
Mounting	Wall-mounted
Type	Non-programmable

Summary

Thermostat Applications and Compatibility

Thermostat Application Guide

Lists thermostat compatibility with various heating/cooling systems.

Thermostat Specifications

Electrical and Physical Details

Details electrical ratings, operating ambient, and physical dimensions of the thermostat.

Safety and Warnings

Installation Safety Caution

Warns to disconnect power before installation to prevent shock or damage.

Mercury Handling Notice

Advises on mercury content and proper disposal if replacing older units.

Thermostat Quick Reference

Home Screen Display Overview

Explains the main screen elements and battery indicator.

Programming & Configuration Item Icons

Describes the meaning of various icons and indicators used in programming.

Installer Configuration Menu

System Mode and Program Settings

Configures system mode, auto changeover, and programmable settings per week.

Cool Savings and Energy Recovery

Controls energy-saving features like Cool Savings and Energy Management Recovery.

Installer Configuration Menu (Continued)

Cycle Rate and Compressor Lockout

Adjusts system cycle rates for heating/cooling and sets compressor protection delay.

Display and Filter Settings

Manages display backlight, temperature units, and filter change reminders.

Operating Your Thermostat

Fan and System Mode Selection

Guides on setting fan operation (Auto/On) and system modes (Heat, Cool, Auto, Off).

Manual Operation and Program Override

Explains how to manually set temperature and temporarily override programmed schedules.

Programming (For Programmable Models)

Setting Time, Day, and Programs

Details how to set the current time, day, and program heating/cooling periods.

Energy Saving Factory Pre-Program

Presents the default energy-saving schedule for heating and cooling.

Custom Program Planning Worksheet

Provides a template for users to plan their custom 5/2 day and 5+1+1 day schedules.

Troubleshooting Guide

Reset Operation and Common Issues

Describes how to reset the thermostat and lists common problems like no heat/cool/fan.

System Cycle Rate Adjustments

Explains how to adjust system cycle rates for faster or slower operation.