White 1066 - Regulating the Stitch Length; Regulating the Drop Feed

ii.
REGULATING THE
STITCH
LENGTH
Th
length
a’
the
stitch can.be changed
with
the
stitch
length dial
(Fig.
1.5).
In
order to set
machine at
a
certain length of stitch, turn
the
stitch length
dial until
rhindicatoris
facing the selected number
on the scale.
The length
of the stitch is
variable
from O—5.The
normal stitch lenght is
2.
a.
Regulate
the length
of the
stitch
as
for forward
sewing.
b.
Push
reverse stitch button
located
in
the center
of the stitch length
dial (Fig.
151
as
far
as it
will
go.
The
machine
will remain
sewing
in reverse while
the
reverse stitch
button is
depressed. When
released the
machine
resumes
forward
sewing with the
same
stitch
length.
The DROP
FEED
is located
on
the bed of the
machine
(Fig
16)
It regulates
the
height of
the feed dog for
sewing normal
material, for darning
and embroidering
1.
For
darning, embroidering
and
monogramming,
turn
the knob
at left
“DOWN”
place
and the feed
mechanism
will
be
lowered under
the level of
the
stitch
plate,
so that
the material can
be moved freely.
2.
For normal sewing
turn
to the knob
to the right
“UP”
place.
12.
REGULATING
THE DROP
FEED
Fig
15
Fig
16
—10—