Wholesale Interiors BRADY User Manual

ITEM : BRADY - KB
4
5
E
L
F
NO PART LIST
QTY
HEADBOARD
CUSHION
1PC
WING
(L)
FOOTBOARD
FOOTBOARD
LEG
ITEM
HARDWARE
QTY
SPRING WASHER
FLAT WASHER
SCREW
M4 x 32MM
L - KEY
M5 x 65MM
1PC
1PC
1PC
2PCS
4PCS
14PCS
14PCS
8PCS
1PC
1
2
3
4
5
A
B
C
D
E
6
2PCS
SIDE RAIL
(L/R)
WING
(R)
7
SIDE RAIL
(L/R)
2PCS
SIDE RAIL
SUPPORT LEG
2PCS
8
9
10
SLAT
SUPPORT LEG
WITH ADJUSTABLE FEET
4PCS
8PCS
JCBB SCREW
M8 x 20MM
JCBC SCREW
M6 x 25MM
JCBC SCREW
M6 x 35MM
JCBC SCREW
M6 x 70MM
WOOD DOWEL
M8 x 30
L - KEY
M4 x 65MM
2PCS
2PCS
JCBC SCREW
M8 x 50MM
4PCS
8PCS
14PCS
1PC
F
G
H
I
J
K
WOOD DOWEL
M10 x 30
4PCS
L
SPRING WASHER
(FOR M8)
FLAT WASHER
(FOR M8)
M
N
4PCS
4PCS
NOTE : AFTER A FEW DAYS OF ASSEMBLY , IT WILL HAVE ACCLIMATIZEDTO THE ENVIRONMENT
PLEASE TIGHTEN ALL HARDWARE. CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
1
BACK
2
3
L
R
I
H
C
L
STEP 1
Begin assembly by attaching each wing (2) & (3) to each side of headboard cushion (1) by
aligning the hole and securing with 3 Allen Bolts (C) , 3 spring washer (H) , 3 flat washer (I)
per side using L-key (L).
STEP 2
Attach each footboard legs (5) to the bottom of the footboard cushion (4) by inserting a dowel
(F) & securing with 1 Allen Bolt (E) per leg using L-key (L).

Wholesale Interiors BRADY Specifications

General

Brand	Wholesale Interiors
Model	BRADY
Category	Indoor Furnishing
Language	English

Summary

Step 1: Attach Headboard Wings

Step 2: Attach Footboard Legs

Step 3: Attach Side Rail Support Legs

Step 4: Attach Side Rails to Wings and Footboard

Attach Side Rail to Wing

Secure side rail to headboard wing using dowels, Allen bolts, spring and flat washers with L-key.

Attach Side Rail to Footboard

Connect the side rail to the footboard using Allen bolts with L-key.

Step 5: Attach Slats and Support Legs

Attach Support Legs to Slat

Secure support legs to the slat using Allen bolts with L-key.

Attach Slat to Side Rail

Connect the slat to the side rail using screws and a Philips head screwdriver.

Step 6: Assembly Completed