EasyManua.ls Logo

Wholesale Interiors CAMELIA User Manual

Wholesale Interiors CAMELIA
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CAMELIA DAYBED
6
Tighten all Bolts from step 2 using L-key (K) and step 3 using L-key (J)
that has been provided. Attach slat (7) to front rail (4) and back rail (5)
by unrolling and securing with 2 screws (I) per each side. Tighten all
screws using Philips Head screwdriver. (not included)
Attach back panel (3) to the back of each left arm & right arm by aligning
the holes and securing with 2 Allen Bolts (D) , 2 Spring Washer (E) , 2
Flat Washer (F) per each side using L-key (J).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Begin assembly by attaching each leg (6) to the bottom of left arm (1) &
right arm (2) securing with 2 Allen Bolts (B) per panel using L-key (J).
Attach the front rail (4) and back rail (5) to the left arm (1) & right arm (2).
Aligning holes and securing with 2 Allen Bolts (A) per each end using
L-key (K).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Question and Answer IconNeed help?

Do you have a question about the Wholesale Interiors CAMELIA and is the answer not in the manual?

Wholesale Interiors CAMELIA Specifications

General IconGeneral
BrandWholesale Interiors
ModelCAMELIA
CategoryIndoor Furnishing
LanguageEnglish

Summary

Page 1 Assembly Steps

Step 1: Attach Legs

Attach legs to left and right arms securing with Allen bolts.

Step 2: Attach Front and Back Rails

Attach front and back rails to arms using Allen bolts and L-key.

Step 3: Attach Back Panel

Attach back panel to arms with Allen bolts, spring and flat washers.

Step 4: Tighten and Attach Slats

Tighten previous bolts and attach slats to rails using screws.

Page 2 Assembly Steps

Step 5: Completion Check

Verify the daybed assembly is complete as shown.

Step 6: Assemble Trundle Frame

Attach trundle front and back panels to side rails using Allen bolts.

Step 7: Attach Castors to Slat

Attach two castors to the bottom of a slat using screws.

Step 8: Attach Slats to Trundle

Attach slat with castors to trundle panels using Allen bolts and washers.

Step 9: Attach Remaining Slats

Attach remaining slats to trundle panels using screws.

Related product manuals