6
Features and Parts
BEFORE USING YOUR APPLIANCE
Remove and retain the exterior and interior packing
Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Handwash all parts that will come into contact with the ice cream (including the removable mixing bowl, churn
blade, transparent lid, measuring cup and scoop).
Note: Please note that the parts are not dishwasher safe.
PREPARE RECIPE INGREDIENTS
Prepare recipe ingredients from your own recipe or from ours, and pour the mixture into the removable mixing
bowl.
Note: No pre-freezing is needed. This appliance has a built-in compressor which is designed to freeze the mix-
ture in between 30:00 – 60:00 minutes.
Ice Cream Recipes can be downloaded from the ICM-128BPS product page on our website,
www.whynter.com or just send us an email at support@whynter.com and we will send you a guide to introduce
you to a variety of mixtures, ice creams, frozen yogurts, sherbets, and sorbets which will open up a world of
possibilities to explore, and once you have mastered the basics, let your imagination run wild, as you try new
flavors and fun combinations
1. Transparent Lid
2.Refill Lid
3. Mixing Blade
4. Display
5. Housing
6. Base
9. Air Vent
7. Removal Bowl
8. Control buttons
To Next Page
Loading...
Need help?
General
