6
Features and Parts
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Wash all parts that will come into contact with the ice cream (including the removable mixing bowl, churn
blade, transparent lid, refill lid, measuring cup and scoop).
Note: Please note that the parts are not dishwasher safe.
PREPARE RECIPE INGREDIENTS
Prepare recipe ingredients from your own recipe or from ours, and pour the mixture into the removable mixing
bowl.
Note: No pre-freezing is needed. This appliance has a built-in compressor which is designed to freeze the mix-
ture in between 30:00 – 60:00 minutes.
Ice Cream Recipes can be downloaded from the ICM-201SB product page on our website, www.whynter.com or
just send us an email at support@whynter.com and we will send you a guide to introduce you to a variety of mix-
tures, ice creams, frozen yogurts, sherbets, and sorbets which will open up a world of possibilities to explore,
and once you have mastered the basics, let your imagination run wild, as you try new flavors and fun combina-
tions.
Removable Mixing
Bowl
LCD Display
Control Buttons
Stainless Steel
Housing
Bottom Plate
Churn Blade
Transparent Lid
Air Vent
Ice Maker Leg (6)
Scoop
To Next Page
Loading...
Need help?
General
