28 29
Earmold
If there is still moisture in
the earmold and/or tub-
ing, use a blower or the
like, as illustrated, to blow
it dry prior to re-connect-
ing to your hearing aid for
use.
Please note:
To replace the tubing if it becomes slack, stiff, yellow
or cracked, consult your hearing care professional.
If the earmold no longer fits your ear, contact your
hearing care professional. The earmold may need to
be changed or adjusted.
•
•
In case of malfunction
If the hearing aid is dead, it could be because:
The hearing aid is not turned on. Make sure that the
battery drawer is closed.
The battery is dead or does not work. Insert a new bat-
tery. Make sure the battery is placed correctly.
The sound bore of the earmold is blocked. Clean the
blocked sound bore.
If the hearing aid volume is not powerful enough, it
could be because:
The battery is nearly exhausted. Insert a new battery.
The sound bore of the earmold is blocked. Clean the
blocked sound bore.
Your ear is blocked by earwax. Contact your ENT doc-
tor/physician.
Your hearing may have changed. Contact your hear-
ing care professional.
•
•
•
•
•
•
•
To Next Page