Using an anchor
If you have an instant ear-tip solution, you can use an anchor to further en-
sure the comfortable retention of the ear-tip in your ear.
See below how to attach the anchor variant that you have received to your
ear-set:
Anchor
Pull the pointed end of the anchor
through the hole on the side of the
tubing.
Continue pulling until the anchor is
stopped by the grip at the end.
Your ear-set is now ready to use.
Position it so that it rests comforta-
bly in your ear.
Anchor with lock
Press the anchor lock towards the
flat end of the receiver until it clicks.
Your ear-set is now ready to use.
Position it so that it rests comforta-
bly in your ear.
12
To Next Page
Loading...
