widos 4900 CNC 3.0 - Welding Process with Traceability According to ISO

Kunststoffschweißtechnik
Starting and operating Chapter 5
22.11.2005 Working Instructions WIDOS 4900 CNC 3.0 (110 V) Page 33 of 76
After expiration of the cooling time you will hear 5 beeps
Display:
2
nd
line:
PCMCIA 0000
The welding is stored on the PCMCIA card
after a few seconds, the display changes
Display:
2
nd
line:
remove pipes
parameter OK
Welding completed, unclamp the pipes
button <Start>: back to basic menu
Display:
2
nd
line:
WIDOS 4900 CNC
22.11.2000 10:10
Basic menu
Current date and time
5.11.1. Welding process with traceability according to ISO
Display:
2
nd
line:
WIDOS 4900 CNC
22.11.2000 10:10
The type of the machine is displayed
Identify with welder's identification code
next menu by pressing <Start> button
Display:
2
nd
line:
please read pipe
code (1st pipe)
Read with barcode reader
Display:
2
nd
line:
please read addit.
pipe code (2nd pipe)
Read with barcode reader
in case of different pipe data, an error message appears:
Display:
2
nd
line:
error: not possible
to weld those pipes
Display:
2
nd
line:
mat diam wall temp
PE80 225 20.5 206° The welding parameters are displayed
next menu by pressing <Start> button