widos 4900 CNC 3.0 - Page 5

Kunststoffschweißtechnik
Contents
22.11.2005 Working Instructions WIDOS 4900 CNC 3.0 (110 V) Page 5 of 76
5.2. Replacing the reduction inserts 22
5.2.1. Using Small and large reduction inserts 22
5.3. Automatic heating element (Optional) 23
5.4. Connection with the basic machine 24
5.5. Operation with emergency power supply 24
5.6. Description of the display 25
5.7. Accessories for reading the data in and out 25
5.7.1. Legitimacy Cards 25
5.7.2. PCMCIA 26
5.7.3. Barcode 26
5.8. Switching the CNC 3.0 on 26
5.9. Programming and Welding with Gas Legitimacy Card 27
5.10. Programming and Welding with General Legitimacy Card 28
5.10.1. Setting the Pipe Data 28
5.11. Welding process 29
5.11.1. Welding process with traceability according to ISO 33
5.12. Error messages 34
5.13. Administration of the welding data 34
5.13.1. Printing the welding data from the internal memory (RAM) 34
5.13.2. Storing the data on the PCMCIA card 36
5.13.3. Printing the welding data from the PCMCIA 37
5.13.4. Setting the time and the date 38
5.14. Reading out the welding data over a serial interface 39
5.15. Serial Printer (optional) 41
5.16. Function of the emergency power supply (Optional) 42
6. Diagnosis program 43
7. Equipment care / maintenance / repair 45
7.1. Storage 45
7.2. Cleaning the machine 45
7.3. Clamping elements 45
7.4. Checking the hydraulic oil level 45
7.5. Venting the hydraulic cylinders 46
7.6. Maintenance, inspection and repair 47
7.7. Saving the Welding Data 47
7.8. Data Interface Connection 47
7.9. Error Signals 48
7.10. Possible Defects and their Elimination 49
7.11. Fuse for overload safety device / printer plug box 50
7.12. Accumulator for emergency power supply (Optional) 50