EN
6. Faults
11
14525888.01 04/2022 EN/DE/FR/ES
WIKA additional operating instructions for EMICOgauge
Faults Causes Measures
Leakage at the
spindle
Leaking sealing packing See chapter 7.4 “Repair of instrumentation
valve”
No ow or restricted
ow of media
Valve closed or partially
open
Ensure that that valve is open
Incorrect mounting Ensure that that valve is correctly mounted
Clogging by unsuitable
media
Check compatibility of the media
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the product
must be taken out of operation immediately.
▶
Ensure that there is no longer any pressure present and protect against
being put into operation accidentally.
▶
Contact the supplier.
▶
If a return is needed, please follow the instructions given in chapter 8.2
“Return”.
WARNING!
Physical injuries and damage to property and the environment caused
by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, ammable or
toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic, radioac-
tive), and also with refrigeration plants and compressors, there is a danger
of physical injuries and damage to property and the environment. Should a
failure occur, aggressive media with extremely high temperature and under
high pressure or vacuum may be present at the product.
▶
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
▶
Wear the requisite protective equipment (see chapter 3.6 “Personal
protective equipment”).
To Next Page
Loading...
Need help?
General
