WIKA CPG1500 - Page 44

44 WIKA operating instructions, model CPG1500
EN
14161966.06 03/2024 EN/DE
6.4.2 Language
The Language function shows a selection of the languages available on the CPG1500.
To change the instrument language, proceed as follows under “Menu” / “Basic
setting” / “Language”:
1. With the [LIGHT/▼] button or [ZERO/▲] button, select the desired language.
2. Confirm the setting by pressing the [MENU/◀▶] button.
⇒
The instrument moves back one menu level.
The input can be aborted with the [HOME] button. The instrument exits
the menu and returns to the main display.
3. Press the [HOME] button in order to exit the menu.
6.4.3 Auto-off time
The Auto-off time function specifies the time after the last button was pressed
or values were last called up via the USB or Bluetooth
®
interface, after which the
CPG1500 switches off automatically.
The following time options can be selected for the Auto-off time:
■
Off
■
5 min
■
15 min (presetting)
■
30 min
With the setting “Off”, the CPG1500 runs continuously and does not switch off
automatically. The instrument then remains active until the batteries are empty or the
instrument is switched off manually using the [On/Off] button.
If the auto-off time is activated and the logger is running, the logger has priority and the
auto-off time only starts after the logger process has been successfully completed. Also,
during a Bluetooth
®
transmission or through a log, the time is stopped and restarted
after completion of this.
To change the Auto-off time, proceed as follows under “Menu” / “Basic setting” /
“Auto-off time”:
1. With the [LIGHT/▼] button or [ZERO/▲] button, select the desired action.
2. Confirm the selection with the [MENU/◀▶] button.
⇒
The instrument moves back one menu level.
6. Operation via menu functions