WIKA CPG1500 - Basic Setting

43WIKA operating instructions, model CPG1500
EN
14161966.06 03/2024 EN/DE
6.3.5 Clear last log
In the Clear last function, only the last stored logger process is deleted.
To delete the last log, proceed as follows under “Menu” / “Logger” / “Clear last”:
1. With the [LIGHT/▼] button or [ZERO/▲] button, select the desired action.
2. Confirm the selection with the [MENU/◀▶] button.
⇒
With Yes or No, the instrument moves back one menu level.
3. Press the [HOME] button in order to exit the menu.
6.3.6 Clear all logs
The Clear all function deletes all stored logger processes.
To delete the last log, proceed as follows under “Menu” / “Logger” / “Clear all”:
1. With the [LIGHT/▼] button or [ZERO/▲] button, select the desired action.
2. Confirm the selection with the [MENU/◀▶] button.
⇒
With Yes or No, the instrument moves back one menu level.
3. Press the [HOME] button in order to exit the menu.
6.4 Basic setting
6.4.1 Wireless
Bluetooth
®
can be enabled for the CPG1500 via the Wireless function. This allows the
CPG1500 to be connected to a PC or mobile device.
Wireless “On” The Bluetooth
®
Classic function is activated and the device can
be searched for and connected via Bluetooth
®
using a PC or
mobile device.
Wireless “Off” The Bluetooth
®
on the CPG1500 is switched off.
Wireless “Classic
+ LE”
The Bluetooth
®
Classic + Low Energy function is activated and
the device can be searched for and connected via Bluetooth
®
using a PC or mobile device. This function must be enabled to
connect to iOS devices.
This function is always displayed.
6. Operation via menu functions