WIKA CPG1500 - Page 42

42 WIKA operating instructions, model CPG1500
EN
14161966.06 03/2024 EN/DE
In order to change the logger duration, proceed as follows under “Menu” / “Logger” /
“Duration”:
1. With the [LIGHT/▼] button or [ZERO/▲] button, select the desired action.
2. Confirm the selection with the [MENU/◀▶] button.
⇒
With ON or OFF, the instrument moves back one menu level.
⇒
If Duration is selected, an input field appears with hour, minute and second
values.
⇒
The entry is made from left to right.
3. Use the [LIGHT/▼] button or [ZERO/▲] button to select the number and use the
[MENU/◀▶] button to jump one digit to the right.
The input can be aborted with the [HOME] button. The instrument exits
the menu and returns to the main display.
4. Press the [HOME] button in order to exit the menu.
6.3.4 Start time
The start of the logger process can be postponed in steps of one minute up to 24 hours.
In order to change the start time, proceed as follows under “Menu” / “Logger” / “Start
time”:
1. With the [LIGHT/▼] button or [ZERO/▲] button, select the desired action.
2. Confirm the selection with the [MENU/◀▶] button.
⇒
With ON or OFF, the instrument moves back one menu level.
⇒
If Start time is selected, an input field appears with hour and minute values.
⇒
The entry is made from left to right.
3. Use the [LIGHT/▼] button or [ZERO/▲] button to select the number and use the
[MENU/◀▶] button to jump one digit to the right.
The input can be aborted with the [HOME] button. The instrument exits
the menu and returns to the main display.
4. Press the [HOME] button in order to exit the menu.
6. Operation via menu functions