9WIKA operating instructions, model CPG1500
EN
14161966.06 03/2024 EN/DE
2.2 Improper use
■
Any use beyond or different to the intended use is considered as improper use.
■
Refrain from unauthorised modifications to the instrument.
■
Do not use this instrument in safety or emergency shutdown devices.
■
Use in hazardous areas (applies only to non-explosion-protected instruments)
■
Use with abrasive and viscous media
2.3 Personnel qualification
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel
who, based on their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of hazardous
media.
2.4 Labelling, safety marks
The labelling, safety markings must be maintained in a legible condition.
Position of product labels
2
3
1
1
Position of product label
2
Position of labelling for general
information
3
Position of labelling for the batteries
2. Safety
To Next Page
Loading...
Need help?
General
