WIKA operating instructions models PGS10, PGS11 and PGS21
4
1. General information
1. General information
The pressure gauge described in the operating instructions has been
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental
criteria during production. Our management systems are certied to
ISO 9001 and ISO 14001.
These operating instructions contain important information on handling
the pressure gauge. Working safely requires that all safety instructions
and work instructions are observed.
Observe the relevant local accident prevention regulations and general
safety regulations for the pressure gauges range of use.
The operating instructions are part of the instrument and must be kept
in the immediate vicinity of the pressure gauge and readily accessible to
skilled personnel at any time.
Skilled personnel must have carefully read and understood the
operating instructions, prior to beginning any work.
The manufacturer‘s liability is void in the case of any damage caused
by using the product contrary to its intended use, non-compliance with
these operating instructions, assignment of insuciently qualied skilled
personnel or unauthorised modications to the pressure gauge.
The general terms and conditions, contained in the sales
documentation, shall apply.
Subject to technical modications.
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PV 20.01, PV 21.01 and PV 21.02
11581752.01 07/2010 GB/D/F/E
GB
To Next Page
Loading...
Need help?
General
