WIKA PGS23 - Page 31

31Pressure gauges with inductive contact model 831, for hazardous areas
14320154.01 06/2019 EN/DE
EN
9. Specifications
Models DPGS43HP.100, DPGS43HP.160
Pressure limitation
Steady Full scale value
Fluctuating 0.9 x full scale value
Short time 40, 100, 250 or 400 bar
Temperatureeect When the temperature of the measuring system deviates
from the reference temperature (+20 °C): max. ±0.5 %/10 K
of full scale value
Wetted materials
Process connection with lower
measuring ange
Stainless steel 316L
Pressure element ≤ 0.25 bar: Stainless steel 1.4571
> 0.25 bar: NiCr alloy (Inconel)
Sealing FPM/FKM
Non-wetted materials
Case, movement, bayonet ring Stainless steel
Dial Aluminium, white, black lettering
Pointer Aluminium, black
Window Laminated safety glass
Ingress protection per IEC/EN 60529 IP54; option: IP65
For further specications see data sheet PV 27.13
Models DPGS43.100, DPGS43.160
Pressure limitation
Steady Full scale value
Fluctuating 0.9 x full scale value
Short time minimum 10 x full scale value, max. 25 bar
Temperatureeect When the temperature of the measuring system deviates
from the reference temperature (+20 °C): max. ±0.5 %/10 K
of full scale value
Wetted materials
Process connection Stainless steel 316Ti (1.4571)
Pressure element ≤ 0.25 bar: Stainless steel 316L
> 0.25 bar: NiCr alloy (Inconel)
Non-wetted materials
Case, bayonet ring Stainless steel
Movement Brass
Dial Aluminium, white, black lettering
Pointer Aluminium, black
Window Laminated safety glass
Ingress protection per IEC/EN 60529 IP54; option: IP65
For further specications see data sheet PV 27.05