7Pressure gauges with output signal, optionally for hazardous areas
11297264.05 07/2019 EN/DE
EN
3. Safety
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and injuries.
▶
Refrain from unauthorised modications to the instrument.
▶
Do not use the instrument with abrasive or viscous media.
Exceptions are diaphragm pressure gauges (models PGT43 and PGT43HP)
with specially coated diaphragms (abrasive) or versions with open connect-
ing anges (viscous).
Any use beyond or dierent to the intended use is considered as improper use.
3.4 Responsibility of the operator
The instrument is used in the industrial sector. The operator is therefore responsible for legal
obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
The operator is obliged to maintain the product label in a legible condition.
To ensure safe working on the instrument, the operating company must ensure
that suitable rst-aid equipment is available and aid is provided whenever required.
that the operating personnel are regularly instructed in all topics regarding work safety,
rst aid and environmental protection and know the operating instructions and in particu-
lar, the safety instructions contained therein.
that the instrument is suitable for the particular application in accordance with its intended
use.
that personal protective equipment is available.
On the wetted parts of the instrument, small residual amounts of the adjustment
medium (e.g. compressed air, water, oil) can adhere from production. With
increased requirements for technical cleanliness, suitability for the application
must be checked by the operator before commissioning.
To Next Page
Loading...
Need help?
General
