WIKA T32. S Series - Page 28

GB
11258421.0901/2012GB/D
28 WIKAoperatinginstructionstemperaturetransmitterT32.xS
Togetcompleteaccesstoallfunctionsandparameters
oftheT32,youmustchoosetheaccesslevel'Specialist'.
Afterinstallation,bydefault,nopasswordisactivated!
8.2 Connection
Throughthemenuentry"connect"→
"Singleinstrument",itwilltrytoestablish
communicationwithaHART
®
-capable
devicewiththeHART
®
PollAddress0
(zero).Ifthisattemptisunsuccessful,the
softwarewilltrytoestablishaMultidrop
connection.Theaddresses1-15willbesuccessivelyconnectedandwill
trytoestablishcommunicationtoaconnecteddevice.
Connectionisonlypossibletoasingleinstrumentatany
onetime!
Aftersuccessfulconnectionthe
softwareshowsthebasicdatafor
theconnectedinstrument:
■
TAGmark
■
Description
■
Usermessage
■
Serialnumber
■
Instrumentmodelandversion
■
ManufacturerandthePCport
used
Conrmconnectionestablishedwith"OK".
8.3 Parameter conguration (congurable)
Alldataimportantforoperatingcanbe
adjustedinthemenu"Instrumentdata"→
"Editinstrumentdata".
8. WIKA T32 conguration software