WIKA T32. S Series - Safety

GB
11258421.0901/2012GB/D
6 WIKAoperatinginstructionstemperaturetransmitterT32.xS
2. Safety
WARNING!
Beforeinstallation,commissioningandoperation,
ensurethattheappropriatetemperaturetransmitterhas
beenselectedintermsofmeasuringrange,designand
specicmeasuringconditions.
Non-observancecanresultinseriousinjuryand/or
damagetotheequipment.
WARNING!
ThisisProtectionClass3equipmentforconnectionatlow
voltages,whichareseparatedfromthepowersupplyor
voltagebygreaterthanAC50VorDC120V.Preferably,
aconnectiontoanSELVorPELVcircuitisrecommended;
alternativelyprotectivemeasuresfromHD60346-4-41
(DINVDE0100-410).
AlternativelyforNorthAmerica:
Theconnectioncanbemadeinlinewith"Class2
Circuits"or"Class2PowerUnits"inaccordancewith
CEC(CanadianElectricalCode)orNEC(National
ElectricalCode)
Furtherimportantsafetyinstructionscanbefoundinthe
individualchaptersoftheseoperatinginstructions.
2.1 Intended use
ThemodelT32.xStemperaturetransmitterisauniversaltransmitter,
congurableviaHART
®
protocol,forusewithresistancethermo-
meters(RTD),thermocouples(TC),resistanceandvoltagesources
aswellaspotentiometers.
Theinstrumenthasbeendesignedandbuiltsolelyfortheintended
usedescribedhere,andmayonlybeusedaccordingly.
2. Safety