Need help?Do you have a question about the WIKA IS-3 and is the answer not in the manual?
General| Output Signal | 4 ... 20 mA, 2-wire |
|---|---|
| Power Supply | 10 ... 30 VDC |
| Material | Stainless steel |
| Accuracy | ≤ ±0.5 % of span |
| Temperature Range | -20 ... +85 °C |
| Ingress Protection | IP65 |
| Long-term stability | ±0.2 % FS per year |
| Process Connection | G 1/4, G 1/2, 1/4" NPT, 1/2" NPT |
| Electrical Connection | M12 x 1 |
Details the pressure transmitter's intended application and approvals for hazardous areas.
Defines the requirements for skilled personnel operating the instrument.
Highlights specific risks associated with the instrument's operation.
Lists available measuring ranges and corresponding overpressure limits.
Details process connection types, thread sizes, and pressure limits.
Specifies the output signal characteristics and permissible load.
Details the required power supply voltage and consumption.
Provides accuracy specifications and coefficients.
Provides essential notes and warnings for instrument mounting.
Details specific safety conditions for explosive atmospheres (Ex i).
Details specific safety conditions for explosive atmospheres (Ex nA/Ex tc).
Provides instructions and required tools for mechanical mounting.
Guides on how to perform the electrical connection and setup.
To Next Page
