WIKA IS-3 - Faults

48 WIKA operating instructions pressure transmitter, model IS-3
MM/YYYY country code based on 14095850.02 12/2014 EN/CN
EN
9. Faults
In the event of any faults, rst check whether the pressure transmitter is mounted correctly, mechanically and electrically.
If complaint is unjustied, the handling costs will be charged.
WARNING!
Danger of injury and damage to property due to escaping media
Escaping media can lead to serious injury. In the event of failure, components can be ejected or media
exhausted under high pressure.
■
Open the connections only after the system has been depressurised.
■
Employ a protective device that prevents parts being ejected. The protective device must not be
removable without the use of tools.
WARNING!
Physical injuries and damage to property and the environment caused by hazardous media
In the event of contact with hazardous media (e.g. oxygen, acetylene, ammable or toxic substances),
harmful media (e.g. corrosive, toxic, carcinogenic, radioactive), and also with refrigeration plants and
compressors, there is a danger of physical injury and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature and under high pressure or
vacuum may be present at the instrument.
■
For these media, in addition to all standard regulations, the appropriate existing codes or regulations
must also be followed.
■
Wear the requisite protective equipment.
9. Faults