5
MAINTAIN WITH CARE. Keep lift clean for better and safe performance. Follow
manual for proper lubrication and maintenance instructions. Keep control
handles and/or buttons dry, clean and free from grease and oil.
STAY ALERT. Watch what you are doing. Use common sense. Be aware.
CHECK FOR DAMAGED PARTS. Check the working condition of moving parts,
breakage of parts or any condition that may affect its operation. Do not use lift if
any component are broken or damaged.
NEVER remove safety related components from the lift. Do not use lift if safety
related components are damaged or missing.
ALWAYS wear safety glasses. Every day eyeglasses should have impact resistant
lenses. They are not safety glasses.
CAUTION SIGN
Watch for this symbol as it means: Hazards or unsafe practices which could result
in severe personal injury or death, product or property damage.
IMPORTANT NOTICE
READ AND UNDERSTAND ALL SAFETY WARNINGS & PROCEDURES BEFORE OPERATING
LIFT. POST THESE SAFETY TIPS WHERE THEY WILL BE A CONSTANT REMINDER TO
YOUR LIFT OPERATOR. FOR SPECIFIC INFORMATION OF THE LIFT, ALWAYS REFER TO
THE LIFT MANUFACTURER’S MANUAL
PLEASE READ ENTIRE MANUAL PRIOR TO INTALLATION
RECOMMENDED TOOLS FOR ASSEMBLY
• 2 Ton engine Hoist, heavy duty lifting strap
• Open End Wrench Set-Metric
• Socket and Ratchet Set-Metric
• Hex Key/ Allen wrench Set-Metric
• Medium/Large Adjustable Wrench
• Utility Knife
• Snips
• Funnel
• Heavy Duty Caster Set
Improper installation can cause accelerated wear, resulting in catastrophic failure
such as property damage and body injury. Manufacturer will assume no liability for
loss or damage of any kind, caused by not following the operation manual. Read this
installation manual thoroughly before attempting to install or operate the lift.
This lift requires a 20amp circuit
running on a 12 gauge wall wire
or extension cord. Anything
lighter duty than this can damage
the motor. Damage to the motor or
components due to underpower is
not covered under the warranty.
To Next Page
Loading...
