Wilfa PROBAKER TIMER - Timer Function

20
EN
INSTRUCTION MANUAL · PROBAKER TIMER
TIMER FUNCTIONS
STOP WATCH:
Probaker timer has a built-in stopwatch that can be used to control how long the
machine has been running. The timer starts automatically to count from 0 when
you start the machine, and pauses when you stop the motor (speed 0).
To set the timer to 0, stop the machine (speed set to 0), and press zero.
TIMER:
Use the +/- buttons to set the preferred time before starting the machine. The
countdown starts automatically when you start your machine by increasing the
speed (speed set over 0). You could also start the countdown after setting the
timer, by pressing the clock button.
If the stopwatch have been used, you have to reset the timer by pressing zero
before starting the timer.
TIP:
Correct kneading time is important for a good result. Read the recipe leaflet for a
guidance of kneading time for the different recipes.