Wilfa PROBAKER TIMER - Troubleshooting Guide

22
EN
INSTRUCTION MANUAL · PROBAKER TIMER
TROUBLESHOOTING GUIDE
Problem Possible Cause Action
Bowl is loose
when mounted
Missing rubber ring in
the bowl mounting base
Reattach the rubber ring
Bowl is not properly
locked
Turn bowl clockwise until it
cannot be moved further
Grease or water
between bowl and
mounting base
Clean rubber ring as described
in “Cleaning Instructions”
Bowl is hard
to lock
Debris between the
base and bowl
Clean rubber ring as described
in “Cleaning Instructions” and
clean the ring and the base of
the machine with a moist cloth
Machine stops
during kneading
Too heavy loading
(Probaker instantaneously
measures how heavy the
machine is loaded and
cuts the power when the
loading is too high)
1. Set speed to 0
2. Reduce the doughs
resistance by either:
a. Adding liquid
b. Removing part of the
dough
c. Kneading at lower speed
Motor overheating
(The motor is equipped with
a thermal protection system
that cuts power if the motor
temperature gets too high)
Unplug the device and let
the machine cool down for
30minutes before restarting
Timer display
does not show
After a longer break (30
minutes) the machine goes
in standby, and only the
clock button will show.
To activate the timer, press
the clock-button. The timer
will automatically start when
increacing the speed.