Williams OVERTURE 2 - Advanced Function Settings; EQ Bass and Treble Adjustment; Power Auto Shutting Down

16
OWNER'S MANUAL
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the Vibrato
Speed. (0 - 127)
EQ BASS Level Setting
1. Press the Function button.
2. Turn the Value Dial to select the EQ Bass edit
menu. The display will show “EQ Bass”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the EQ Bass
Level. (-12 to +12)
EQ Treble Level Setting
1. Press the Function button.
2. Turn the Value Dial to select the EQ Bass edit
menu. The display will show “EQ Treb”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the EQ Treble
Level. (-12 to +12)
ADVANCED
FUNCTIONS
Power Auto Shutting Down On/Off Setting
The Overture 2 has a Power saving function
that will shut off the Piano after 30 minutes of
non-use. The default setting is Off, however if
you nd you want this function to work use the
steps below.
1. Press the Function button.
2. Turn the Value Dial to select the Power Auto
edit menu. The display will show “AutoPowr”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the Power Auto
feature on or off.
EQ Treb
AutoPowr
EQ Bass
VibSpeed