EasyManua.ls Logo

Willow Pump - CLEANING & MAINTENANCE

Willow Pump
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
18
instructional videos willowpump.com | customer care 1-888-WILLOW-3 Willow Breast Pump Instructions for Use
CLEANING & MAINTENANCE
First Time Use After Each Use
Pump
Wake up Pump by plugging in
for a few seconds.
No cleaning required; wipe with
damp cloth as needed.
Do not immerse Pump in water.
Flange & Flextube
Boil for 10 minutes.
Do not microwave Flange.
See detailed instructions.
Clean with mild dish washing soap
and brushes provided.
See detailed instructions.
Milk Bag
Milk Bag is disposable and NOT for reuse.
Do not microwave Milk Bag.
Discard after each use and do not reuse.
TIP: FLANGE AND FLEXTUBE
ARE DISHWASHER SAFE USING TOP RACK ONLY.
WARNINGS:
DO NOT wash or sanitize Pump.
Wipe with clean, damp cloth, if needed.
DO NOT use harsh chemicals to clean Flange and Flextube.
Use mild dish washing soap.
AFTER EVERY USE, FOLLOW THESE DIRECTIONS:
1. RINSE IMMEDIATELY Separate Flange from Pump, then separate Flextube
from
Flange, and rinse both parts with water to avoid buildup of breast milk residue
and prevent bacterial growth.
2. SOAK FOR 5 MINUTES Using mild dish washing soap, soak both parts in very
warm, soapy water for 5 minutes (minimum).
3. WASH + BRUSH THOROUGHLY Using the two Cleaning Brushes provided, wash
each part separately in soapy water for 60 seconds (minimum) and brush
for 30 seconds (minimum) as follows:
fig 3a Insert small
brush into
Spout and clean.
fig 3b Use large brush to clean inside
top opening and body being
careful NOT to push brush all the
way through Tip at bottom.

Related product manuals