Willow Pump - 11 Operating Conditions; 12 Transport, Storage, Disposal; 13 Glossary & Symbols

61
60
instructional videos willowpump.com | customer care 1-888-WILLOW-3 Willow Breast Pump Instructions for Use
GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC EMISSIONS
a. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and
land-mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the location in
which the Willow Breast Pump is used exceeds the applicable RF compliance level above, the Willow Breast
Pump should be observed to verify normal operation. If abnormal performance is observed, additional
measures may be necessary, such as reorienting or relocating the Willow Breast Pump.
b. Over the frequency range 150 kHz to 80MHz, field strengths should be less than 3 V/m.
11. OPERATING CONDITIONS
OPERATING CONDITIONS
Operating Temperature 5 to 40 °C
Relative Humidity 15% - 90%; non-condensing
Pressure 700 hPa to 1060 hPa
12. TRANSPORT, STORAGE, DISPOSAL
TRANSPORT AND STORAGE
Temperature - 20 to 60 °C
Relative Humidity 0%-93%; non-condensing
Pressure 50 hPa to 1060 hPa
DISPOSAL INFORMATION
The breast pump contains a rechargeable lithium ion battery. Use your local return and
collection system for electrical waste and electronic equipment (including batteries).
Flange and Milk Bags can be disposed of in your home’s recycling container. Flextube
™
should be disposed of in your home’s waste management container.
13. GLOSSARY & SYMBOLS
PUMP CONTROL BUTTONS
BUTTON FUNCTION
ON / OFF
PUMP / PAUSE
UP ARROW = INCREASE Suction Strength
DOWN ARROW = DECREASE Suction Strength