EasyManua.ls Logo

Willow Pump - PUMP MANAGEMENT

Willow Pump
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
42
instructional videos willowpump.com | customer care 1-888-WILLOW-3 Willow Breast Pump Instructions for Use
8. TURN PUMP OFF Pump will turn off automatically after pumping.
Pump may also be turned off manually by pressing On/Off button.
fig 9a Hold Pump
upright, then open
Pump by squeezing
the two Buttons
on top-sides
of Flange.
fig 9b Pull top open first,
then unhook Tab and Slot.
9. OPEN PUMP
11. CLEAN Flange and Flextube
as instructed
(reference Section 6. PRODUCT PARTS - CLEANING & MAINTENANCE).
12. CHARGE Check battery level after each use by pressing On/Off button.
If the battery level is low, charge Pump with Charger provided.
(reference Section 6. PRODUCT PARTS - Charging Willow).
10. REMOVE MILK BAG
fig 10a Slide Flange Door open
by pushing blue thumb pad in
and sliding up.
fig 10c Remove filled Milk Bag and
store in refrigerator or freezer. The
One-way Valve allows it to be laid
flat without leaking.
fig 10b Detach Milk
Bag’s One-way Valve
from Flextube
Collar.
TIP: Additional Chargers available for purchase at willowpump.com.

Related product manuals